How Much Does an Aluminum Slat Fence Cost Per Foot?
Short answer: a 6-foot-high QuickScreen aluminum slat fence costs about $104 to $138 per linear foot for materials, depending on the slat style and how the posts are set. Styles with 1/2″ or 3/8″ gaps run $117 to $131 per foot. That price covers the slats, spacers, side frames, caps and one post per 6-foot section. Freight shipping is free on website orders; sales tax and installation are extra.
These are our store prices as of October 2026 and may change. Use them as an estimate, not a final price: for an exact figure for your project, request a quote.
Fence pricing is notoriously hard to pin down. Most companies won’t publish a number until someone has measured your yard. We think you should be able to see the real cost before you pick up the phone, so this guide uses the actual prices from our online store and shows exactly how they add up.
Here’s what we’ll cover:
- The price per foot for every slat style
- How we work out “per foot” (and why it’s one post per section, not two)
- A worked example for a typical backyard
- What else to budget for: gates, corners, shipping and installation
Aluminum Slat Fence Cost Per Foot, by Style
Every QuickScreen fence is built in sections up to 6 feet wide and 6 feet high. The table shows the material cost of one section and the cost per linear foot. “Set in concrete” uses a post extender below ground. “Surface mounted” bolts the post to a concrete slab, patio or deck with a base plate.
| Slat style (6 ft high) | Set in concrete | Surface mounted |
| 2.56″ slats, 1″ gaps | $107 / ft ($640.84 per 6 ft section) |
$104 / ft ($621.59 per section) |
| 2.56″ slats, 1/2″ gaps | $120 / ft ($722.57 per section) |
$117 / ft ($703.32 per section) |
| 2.56″ slats, 3/8″ gaps | $120 / ft ($721.35 per section) |
$117 / ft ($702.10 per section) |
| 6″ slats, 1″ gaps | $122 / ft ($733.94 per section) |
$119 / ft ($714.69 per section) |
| 6″ slats, 1/2″ gaps | $131 / ft ($783.51 per section) |
$127 / ft ($764.26 per section) |
| 6″ slats, 3/8″ gaps | $130 / ft ($782.29 per section) |
$127 / ft ($763.04 per section) |
| 6″ slats, full privacy (no gaps) | $138 / ft ($826.44 per section) |
$135 / ft ($807.19 per section) |
| Combo (6″ and 2.56″ slats), 1/2″ gaps | $124 / ft ($746.27 per section) |
$121 / ft ($727.02 per section) |
| Combo (6″ and 2.56″ slats), 3/8″ gaps | $124 / ft ($745.05 per section) |
$121 / ft ($725.80 per section) |
Prices from our online store, October 2026, in black powder coat, before sales tax, with freight shipping free on website orders. Each run also needs one extra end post: $151.44 set in concrete or $132.19 surface mounted.
Bigger gaps between slats mean fewer slats per section, which is why the 1″ gap styles are the least expensive. Full privacy uses the most slats, so it sits at the top of the range. Shorter fences cost less again, because a lower section needs fewer slats.
How We Work Out “Per Foot”
A fence is a row of sections, and every section shares its posts with its neighbors. A 60-foot run built from ten 6-foot sections needs eleven posts, not twenty. So the fair way to price a fence per foot is one section plus one post, divided by the 6-foot width. The leftover post at the end of the run is added once.
Each section in the table includes:
- The slats for that style (10 to 12 per section, depending on slat width and gap)
- A pack of spacers to set the gap between slats
- A pair of side frames, which hold the slats against the posts
- Side frame cap kits
- One 2.56″ x 72″ heavy-duty aluminum post with its cap
- One post extender (set in concrete) or one base plate and cover (surface mounted)
Be careful when comparing quotes. Some prices are for a single free-standing panel with a post on each end. That’s fine if you only need one panel, but multiplying it across a whole fence counts every post twice and makes the fence look more expensive than it is.
Worked Example: A 60-Foot Backyard Fence
Say you’re fencing a 60-foot straight run with 6″ slats and 1/2″ gaps, posts set in concrete.
- 10 sections at $783.51 = $7,835.10
- 1 end post with extender = $151.44
- Total materials: $7,986.54, or about $133 per foot
The same 60 feet in 2.56″ slats with 1″ gaps comes to $6,559.84, about $109 per foot. Adding a matching single gate starts at $1,261.95.
The fence calculator builds the material list for your exact layout.
What Else to Budget For
Gates. Matching single gates run $1,261.95 to $1,565.88, and double or driveway gates $2,431.57 to $2,811.30, depending on slat style and mounting. Custom gate sizes are available on request.
Corners and changes of direction. Corners use a universal 3-way post in place of a standard post ($258.94 for a 2-pack of 72″ posts).
Shipping. Freight shipping is free on website orders that include panels, gates, posts, slats or frames, delivered to your home, a job site or a business address anywhere in the lower 48 states. Small parts ordered on their own, like spacers or clips, ship by parcel at standard rates.
Installation. The prices above are materials only. QuickScreen is a modular system designed for DIY. Posts go in, side frames attach, and slats slide into place. Our step-by-step install guide and videos walk through it. If you’d rather not do it yourself, any fence contractor can install it, and we have preferred installers in Texas and Florida.
Over 6 feet high. QuickScreen can go up to 8 feet, but our standard sections are 6 feet. For anything taller, send us your measurements for a quote.
Is It Worth Paying More Than Wood or Vinyl?
Aluminum slat fencing costs more up front than a basic wood fence. You only pay for it once, though. It doesn’t rot, warp, rust or need staining, and it’s non-combustible, which matters more every year in wildfire country. It also comes with a limited lifetime warranty on the aluminum and a 20-year warranty on the powder-coated finish.
We break down the long-term numbers in Is a Premium Fence Worth It? and compare materials side by side in Aluminum vs. Composite vs. Wrought Iron.
Frequently Asked Questions
How much does a 6-foot aluminum privacy fence cost per foot?
For full privacy (6″ slats, no gaps) it’s about $138 per foot with posts set in concrete, or $135 surface mounted, before installation (freight shipping is free on website orders). Slat styles with small gaps are about $117 to $131 per foot.
Does the price include installation?
No. These are material prices. QuickScreen is designed so homeowners can install it themselves, or you can hire any fence contractor.
Why do you count one post per section?
Because neighboring sections share posts. A run of ten sections needs eleven posts, so we price each section with one post and add the final end post once.
Do you offer contractor or wholesale pricing?
Yes. Contractors, builders and installers can apply for a wholesale account with preferred pricing.
Do you ship outside Texas?
Yes, we ship QuickScreen fence and gate systems across the United States.
Get an Exact Price for Your Fence
The per-foot numbers above give you a solid budget. For an exact material list and price, run your layout through the fence calculator, or browse our aluminum fence and gate panels.
Request a quote, call (469) 817-3385 or email sales@foundationfencesupply.com. And when you talk to your fence contractor, builder or landscaper about your next project, ask them about Foundation Fence Supply.